Sea&Sea MDX-7D Underwater Housing For Canon EOS 7D Camera

Sea&Sea MDX-7D Product Page 

Features:

• Two Fiber Optic Cable Sockets Using L-Type Cable
• Switch Easily Between Still Image and Movie Modes
• Manufactured Of Lightweight Durable Aluminum
• Controls Almost All EOS 7D Essential Functions
• Two Way Shutter Operation: Pressing From The Top Or Pulling From The Front
• TTL Auto Adjustment Available When Using An Optional YS Converter/C. To unable TTL- Auto a 5-Pin Sync Cord/N Must Be Used To Connect To A Sea&Sea Strobe
• Tripod Socked In The Central Region On The Button Of Housing
• Standard Two Bulkhead Connectors: One type-N Connector (2-pin wired for manual) And One 6-Pin Wired For A Dedicated TTL
• Equipped With A Optical Viewfinder 0.5x Standard. Interchangeable 0.66x/0.8x Viewfinders Available Separately
• Quick Shoe Feature Allows Easy Installation & Removal Of The Camera From The Housing
• Built In Leak Sensor
• Rated To A Depth Of 60m / 200Ft.
• *The MDX-7D housing comes from the factory with these type-N connectors: one 2-pin wired connector and one 6-pin wired connector. *To use two SEA&SEA YS-Series strobes with the factory-equipped type-N connectors, you must use the 5-pin Dual Sync Cord/N.
Replacement of the strobe sync connector (6-pin wired ??? 2-pin wired) Consult a SEA&SEA authorized service center for the details. Customizing the housing offers additional functions. You can replace the 6-pin wired TTL converter connector on the top of the housing with a 2-pin wired strobe connector for an additional cost. This modification provides two 2-pin wired strobe connectors so you can connect two SEA&SEA YS-Series strobes. *This modification does not support automatic TTL flash adjustment. *It requires the 5-pin Sync Cord/N.

Specifications:

• Body: Corrosion Aluminum Alloy
• Depth Rating: 60mm / 200Ft.
• Dimensions: (WxHxD) 341x194x141x / 13.6x 7.8x5.6 inch
• Weight: 2,700g / 94.5 .oz

Sea&Sea Canon MDX Series Port Charts

Macro Lens

Wide-Angle

Zoom Gear